--- title: "Network Troubleshooting Tools" slug: "network-troubleshooting" updated: 2023-11-05T06:24:44Z published: 2023-11-05T06:24:44Z canonical: "docs.tegsoft.com/network-troubleshooting" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.tegsoft.com/llms.txt > Use this file to discover all available pages before exploring further. # Network Troubleshooting Tools Network troubleshooting is the act of discovering and correcting problems with connectivity, performance, security, and other aspects of networks. This article introduces network troubleshooting tools used for different purposes. These tools are; ## **1. TELNET** **TELNET** is a protocol to provide communication over the Internet or a LAN using a virtual terminal connection. If you need to check a specific **address** and **port**, you can use the **TELNET** tool. **Installation:** ➤ **TELNET** is most likely installed by default on **Tegsoft** images. If it is not, you can install using the command below: ```actionscript yum -y install telnet ``` **Usage:** ➤ Enter the command below: ```actionscript telnet ``` **Example:** telnet google.com 443 **Outputs Examples:** ➤ If TELNET **successfully** connects, a message displays similar to the following: ```actionscript [root@server ~]# telnet google.com 443 Trying 142.250.185.142... Connected to google.com. ``` ➤ If TELNET **fails** to connect, a message displays similar to the following: ```actionscript [root@server ~]# telnet google.com 10043 Trying 142.250.186.110... telnet: connect to address 142.250.186.110: Connection timed out ``` ➤ To exit the TELNET session, type **Ctrl + ]** for **Windows**, type **Control + ü** for **MAC** on your keyboard. ➤ This changes the command prompt to show as telnet>. ➤ Back in the terminal, type in the word '**quit**' to end the session. ➤ If TELNET session successfully ends, a message displays similar to the following: ```actionscript [root@server ~]# telnet google.com 443 Trying 216.58.212.174... Connected to google.com. Escape character is '^]'. ^] telnet> quit Connection closed. [root@server ~]# ``` For more information about telnet or access detailed manual page, open terminal and type the "**m****an** **telnet**" command. ## **2. TRACEROUTE** **Traceroute**, also called tracepath or tracert, is a network tool used to determine the path packets take from one IP address to another. If you need to check the trace of an IP Address, you can use the **Traceroute** tool. **Installation:** **➤ Traceroute** is most likely installed by default on **Tegsoft** images. If it is not, you can install using the command below: ```actionscript yum -y install traceroute ``` **Usage:** ➤ Enter the command below: ```actionscript traceroute ``` **Example:** traceroute 8.8.8.8 **Outputs Examples:** ➤ If Traceroute **successfully** connects, a message displays similar to the following: ```actionscript [root@server ~]# traceroute 8.8.8.8 traceroute to 8.8.8.8 (8.8.8.8), 30 hops max, 60 byte packets 1 *** HIDDEN FOR SECURITY*** 2 *** HIDDEN FOR SECURITY*** 3 *** HIDDEN FOR SECURITY*** 4 *** HIDDEN FOR SECURITY*** 5 *** HIDDEN FOR SECURITY*** 6 ipv4.de-cix.fra.de.as15169.google.com (80.81.193.108) 1.418 ms 1.432 ms nixcz.net.google.com (91.210.16.211) 8.173 ms 7 108.170.251.129 (108.170.251.129) 1.476 ms 108.170.245.49 (108.170.245.49) 8.307 ms 108.170.251.193 (108.170.251.193) 1.875 ms 8 142.250.236.57 (142.250.236.57) 1.565 ms 209.85.246.117 (209.85.246.117) 7.968 ms 142.251.224.129 (142.251.224.129) 8.267 ms 9 dns.google (8.8.8.8) 1.509 ms 8.202 ms 8.303 ms ``` In this output, last row displays entered destination IP. This means that the server has successfully accessed the Destination IP. ➤ If Traceroute **fails** to connect, a message displays similar to the following: ```actionscript [root@server ~]# traceroute 45.95.*HIDDEN*.*HIDDEN* traceroute to 45.95.*HIDDEN*.*HIDDEN* (45.95.*HIDDEN*.*HIDDEN*), 30 hops max, 60 byte packets 1 ***HIDDEN FOR SECURITY*** 2 ***HIDDEN FOR SECURITY*** 3 ***HIDDEN FOR SECURITY*** 4 ***HIDDEN FOR SECURITY*** 5 ***HIDDEN FOR SECURITY*** 6 ***HIDDEN FOR SECURITY*** 7 ***HIDDEN FOR SECURITY*** 8 ***HIDDEN FOR SECURITY*** 9 ***HIDDEN FOR SECURITY*** 10 ***HIDDEN FOR SECURITY*** 11 ***HIDDEN FOR SECURITY*** 12 ***HIDDEN FOR SECURITY*** 13 * * * 14 * * * 15 * * * 16 * * * 17 * * * 18 * * * 19 * * * 20 * * * 21 * * * 22 * * * 23 * * * 24 * * * 25 * * * 26 * * * 27 * * * 28 * * * 29 * * * 30 * * * ``` In this output, after the 13th row it stops hopping to the next address. This is an example of blocked or unavailable destination point. For more information about traceroute or access detailed manual page, open terminal and type the "**m****an traceroute**" command. ## 3. OPENSSL **OpenSSL** is an open-source command line tool that is commonly used to generate private keys, create CSRs, install your SSL/TLS certificate, and identify certificate information. If you need to check the SSL connection, you can use the OpenSSL tool. **Installation:** **➤** **OpenSSL** is most likely installed by default on **Tegsoft** images. If it is not, you can install using the command below: ```actionscript yum -y install openssl ``` **Usage:** ➤ Enter the command below: ```actionscript openssl s_client -connect : ``` **Example:** openssl s_client -connect google.com:443 **Outputs Examples:** ➤ If OpenSSL **successfully** connects, a message displays similar to the following: ```actionscript [root@server ~]# openssl s_client -connect google.com:443 CONNECTED(00000003) depth=3 C = BE, O = GlobalSign nv-sa, OU = Root CA, CN = GlobalSign Root CA verify return:1 depth=2 C = US, O = Google Trust Services LLC, CN = GTS Root R1 verify return:1 depth=1 C = US, O = Google Trust Services LLC, CN = GTS CA 1C3 verify return:1 depth=0 CN = *.google.com verify return:1 --- Certificate chain 0 s:/CN=*.google.com i:/C=US/O=Google Trust Services LLC/CN=GTS CA 1C3 1 s:/C=US/O=Google Trust Services LLC/CN=GTS CA 1C3 i:/C=US/O=Google Trust Services LLC/CN=GTS Root R1 2 s:/C=US/O=Google Trust Services LLC/CN=GTS Root R1 i:/C=BE/O=GlobalSign nv-sa/OU=Root CA/CN=GlobalSign Root CA --- Server certificate AND SO MANY OTHER INFORMATIONS AND SO MANY OTHER INFORMATIONS AND SO MANY OTHER INFORMATIONS AND SO MANY OTHER INFORMATIONS ``` This output contains information about SSL Connection, Handshake and Remote Server's Certificate detail. ➤ If SSL **fails** to connect, a different output than the above successful output is obtained. This indicates that the destination has SSL or network problems. For more information about OpenSSL or access detailed manual page, open terminal and type the "**m****an openssl**" command. ## 4. MTR A dynamic alternative to the traceroute program is MTR. Combining the functionality of ping and traceroute, MTR allows you to constantly poll a remote server and see how the latency and performance changes over time. **Installation:** **➤** MTR is not installed by default on **Tegsoft** images. You can install using the command below: ```actionscript yum -y install mtr ``` **Usage:** ➤ Enter the command below: ```actionscript mtr ``` **Example:** mtr [google.com](//google.com) **Outputs Examples:** ➤ If MTR **successfully** connects, a message displays similar to the following:![](https://cdn.document360.io/7d619985-59f1-4eeb-98a5-51b967cac580/Images/Documentation/WhatsApp%20Image%202022-01-18%20at%2014.45.39.jpeg?sv=2026-02-06&spr=https&st=2026-11-17T22%3A51%3A31Z&se=2026-11-17T23%3A51%3A31Z&sr=b&sp=r&sig=BhoTFq1tFoc2e9z0kZTfCZVdcxaFX4GPjg9yvVDZ4nc%3D) ➤ It is observed in this output whether the package goes to the destination and how much latency or drop is in each hop. **Frequently Used Commands:** ➤ **-c COUNT** Use this option to set the number of pings sent to determine both the machines on the network and the reliability of those machines. Each cycle lasts one second. ➤ **-n** Use this option to force MTR to display numeric IP numbers and not try to resolve the host names. ****➤**** **-i SECONDS** Use this option to specify the positive number of seconds between ICMP ECHO requests. The default value for this parameter is one second. **➤** An example of using the above commands together and message screen are given below. **mtr -c 20 -i 5 -n [google.com](//google.com)** **![](https://cdn.document360.io/7d619985-59f1-4eeb-98a5-51b967cac580/Images/Documentation/WhatsApp%20Image%202022-01-19%20at%2014.21.28%20copy.png?sv=2026-02-06&spr=https&st=2026-11-17T22%3A51%3A31Z&se=2026-11-17T23%3A51%3A31Z&sr=b&sp=r&sig=pNDXmzxVG3zizR5E89nqvnf4N8AKYt%2FsY1Oelfck9vc%3D)** **MTR** has various flags which can be useful to troubleshoot network problems and live screen which updates itself with every packet sent. For more information about MTR or access detailed manual page, open terminal and type the "**m****an mtr**" command. ## 5. PING The Ping tool is used to test whether a particular host is reachable across an IP network. A Ping measures the time it takes for packets to be sent from the local host to a destination computer and back. The Ping tool measures and records the round-trip time of the packet and any losses along the way. **Installation:** **➤** **Ping** is most likely installed by default on **Tegsoft** images and many Linux distributions. If it is not, you can install using the command below: ```actionscript yum -y install iputils ``` **Usage:** ➤ Enter the command below: ```actionscript ping ``` **Example:** ping [google.com](//google.com) **Outputs Examples:** ➤ If Ping **successfully** connects, a message displays similar to the following: ```actionscript [root@server ~]# ping google.com PING google.com (142.250.185.110) 56(84) bytes of data. 64 bytes from fra16s49-in-f14.1e100.net (142.250.185.110): icmp_seq=1 ttl=118 time=8.98 ms 64 bytes from fra16s49-in-f14.1e100.net (142.250.185.110): icmp_seq=2 ttl=118 time=8.19 ms 64 bytes from fra16s49-in-f14.1e100.net (142.250.185.110): icmp_seq=3 ttl=118 time=8.13 ms 64 bytes from fra16s49-in-f14.1e100.net (142.250.185.110): icmp_seq=4 ttl=118 time=8.23 ms 64 bytes from fra16s49-in-f14.1e100.net (142.250.185.110): icmp_seq=5 ttl=118 time=8.19 ms 64 bytes from fra16s49-in-f14.1e100.net (142.250.185.110): icmp_seq=6 ttl=118 time=8.17 ms 64 bytes from fra16s49-in-f14.1e100.net (142.250.185.110): icmp_seq=7 ttl=118 time=8.11 ms ^C --- google.com ping statistics --- 7 packets transmitted, 7 received, 0% packet loss, time 6007ms rtt min/avg/max/mdev = 8.111/8.290/8.985/0.286 ms ``` ➤ If Ping **fails** to connect, a message displays similar to the following: ```actionscript bash:~ ping exampleserver PING exampleserver.site.com (%ipadress%): 56 data bytes Request timeout for icmp_seq 0 Request timeout for icmp_seq 1 Request timeout for icmp_seq 2 Request timeout for icmp_seq 3 Request timeout for icmp_seq 4 Request timeout for icmp_seq 5 Request timeout for icmp_seq 6 Request timeout for icmp_seq 7 Request timeout for icmp_seq 8 Request timeout for icmp_seq 9 Request timeout for icmp_seq 10 Request timeout for icmp_seq 11 ^C --- exampleserver.site.com ping statistics --- 13 packets transmitted, 0 packets received, 100.0% packet loss ``` ➤ You can press CONTROL + C to break and return to cli. Failure to get a response using the Ping tool does not mean that there is no access to the server, it should also be checked with more advanced tools; Telnet, Traceroute etc.For more information about Ping or access detailed manual page, open terminal and type the "**m****an ping**" command. ## 6. DNS TROUBLESHOOTING DNS troubleshooting helps to figure out whether the remote server is accessible or its DNS is resolved. **Usage:** ➤ Enter the command below: ```actionscript host ``` **Example:** host [google.com](//google.com) **Outputs Examples:** ➤ If DNS Troubleshooting **successfully** connects, a message displays similar to the following: ```actionscript [root@arge12 ~]# host arge11.tegsoftcloud.com arge11.tegsoftcloud.com has address 169.50.37.167 ``` ➤ If DNS Troubleshooting **fails** to connect, a message displays similar to the following: ```actionscript [root@arge12 ~]# host example.tegsoftcloud.com Host example.tegsoftcloud.com not found: 3(NXDOMAIN) ``` When there are DNS resolution problems related to the server, DNS servers can be viewed using the following command. ```actionscript cat /etc/resolv.conf |grep nameserver ``` **Outputs Examples:** ```actionscript [root@server ~]# cat /etc/resolv.conf |grep nameserver nameserver 192.168.1.1 nameserver 192.168.1.2 ``` --- *Tegsoft makes no representations or warranties, either express or implied, by or with respect to anything in this document, and shall not be liable for any implied warranties of merchantability or fitness for a particular purpose or for any indirect, special or consequential damages.* *Copyright* © *2021, Tegsoft. All rights reserved.* *"Tegsoft" and Tegsoft’s products are trademarks of Tegsoft. References to other companies and their products use trademarks owned by the respective companies and are for reference purpose only.*